Since we spend a good amount of time each day in the kitchen, we do not like to see a complete overview, dull in our kitchen. Therefore, opt for kitchen remodeling in order to rejuvenate the décor of the kitchen from time to time. A great way to improve the overall appearance of the kitchen is almost instantly refill kitchen cabinets. The best part of this project is that you do not invest much time and money for it. Recoloring an estimated cost of kitchen cabinets is not the dollar over $ 200.
As an application should be your kitchen cabinets?
Kitchen furniture can be restained if it has serious structural problems. We must therefore examine it carefully to ensure that no significant damage to them and then go to the next course of action. You must provide the tools and materials. Are wood stripping solvent paper, sand, a soft, lint brush, wood stain and polyurethane water-based or lacquer. Once you're ready for all these things in your hand, you must follow these steps to complete the project.
Step 1: First, you must remove the wall cabinets where they are usually hung with screws. Check inside the box in order to relocate them in the same order. Then unscrew all hardware, including knobs, handles, hinges, etc. and keep them in a bowl so they are not lost.
Step # 2: The next step is to remove old finish cabinets whenever possible. This is to ensure that the new spot and into the wood grain. To this end, a wood stripping solvent is preferred because it can clean the place without much effort. Apply the solvent in wardrobes with brush and wait about 10 minutes. You will find that the solution becomes thick and bubbly as the existing paint is dissolved.
Step 3: Scratch the solvent extraction using a metal spatula. Through the cracks, you need a flexible platform for cleaning. You
must move forward in the direction of the grain or it will eventually
be several scratches on the surface of the timber to be removed with
much sanding. If necessary, you can reapply any solvent to clean finish. Then rub the wood surface with mineral spirits to get rid of waste left behind. Once the cabinets are dry, sand with sandpaper to obtain a flat surface.
Step 4: After cleaning the sand surface with a dry cloth, apply the new finish stain with a brush. Use long strokes and uniforms for this application. If you are looking for a bright and flashy for your cabinets, you may need to apply more than one layer. Let the first coat dry for about six hours, then sand lightly and apply the second coat on it. Repeat the process of sanding and refilling of the kitchen cabinets if you want to add more number of layers. However, no new application for dye unless the previous coat has been absorbed properly.
Step 5: Allow paint cool spot to dry thoroughly to complete 24 hours. Then, apply a polyurethane varnish to protect the lens. You can use a brush or spray paint to complete the task. If applied in two layers. Keep a distance of 24 hours between two layers of sand and the first coat before applying the second coat. Once the last coat has dried properly, you can re-install the new hardware on cabinets and hands with screws.
Therefore,
we can see that restaining kitchen cabinets is an easy and simple
process that can be done to improve the visual appearance of the
decoration of your kitchen. To do the job, be sure to protect your hands from all those chemicals with the use of gloves. In addition, the project must be conducted in an area with adequate ventilation. Otherwise, the toxic fumes of these chemicals are trapped and suffocated may enter into it.